Safer, Softer Landings with SlideRenu® Landing Pads



Standard sizes are in stock and ship within 24 hours. Click here to order.

Custom sizes and colors are available by calling 440-9430-2490.


SlideRenu slidepad used at bottom of slide

Water slide landing pads are more than just aesthetic features. They play an important role in water park safety by reducing and preventing abrasions and impact injuries. An important consideration in choosing a landing pad is not only a pad's ability to resist becoming a breeding ground for fungi and bacteria, but also to be safely mounted without the use of metal bolts or screws that will rust or cause injury. Nylon surface anchors, commonly referred to as bantam plugs, can crack from repeated impact, resulting in the pad loosening, shifting and potentially becoming a safety hazard.



SlidePad® was designed to replace old, unsafe landing pads.

slidepad vs. competitor

Replace Your Outdated Landing Pads!

Commonly used landing pads are constructed of several layers of laminated foam glued together on top of a thin PVC base. The entire pad is then wrapped in a layer of vinyl pool liner material. Repeated impact results in a breakdown in the foam's density, causing the vinyl to peel away at the edges and cracks to form.

old slidepad construction
old slidepad construction

Shown below are common landing pad failures:

  • Fading, discoloration
  • Disintegration
  • Corner cracking that causes scrapes and water to enter into the pad
  • Rusting and missing bolts/fasteners
  • Stress cracking in a PVC base from repeated impact
old slidepad with cracked base rusty screws in an old slide pad

SlidePad® will NOT discolor or mold!

rusty screws in an old slide pad

SlidePad® does not require metal fasteners that loosen or rust!

rusty screws in an old slide pad

SlidePad® will NOT disintegrate

rusty screws in an old slide pad

SlidePad® will NOT crack or peel

old slidepad with cracked base

SlidePad® has no moving parts or PVC base that will crack with repeated impact!



SlidePad® is constructed of a thick, beveled edge dense foam base encapsulated in AquaPebble™ pebbles.

During the AquaPebble™ encapsulation process, these polyolefin pebbles are chemically bonded to the foam base using a proprietary bonding adhesive. The polyolefin pebbles are then hermetically sealed with a clear chlorine-resistant flexible coating.

This proprietary process ensures that SlidePad® remains not only chlorine-resistant, but also resistant to UV exposure and impervious to water as well as fungistatic and hygienic.

Our standard sized pads 3'x4', 3'x5', 4'x6' and 6'x8', with thicknesses of 1", 2" or 3". Pads in our aquatic blue color blend (as shown above) are in stock and ship within 24 hours. SlidePad® can be custom designed with your water park's logo and/or color scheme as well as customized to any size or shape, even aquatic animals!



SlidePad® Features

VERSATILITY

Use at the end of slides, pool bottom and any area that requires a slip-resistant, soft, safe landing. Use below the water's surface, indoors or outdoors.

SAFETY

Unlike competitor's pads, SlidePad® does NOT require external fasteners, screws or anchor bolts that compromise the safety of your guests. SlidePad's™ beveled edges prevent tripping.

DURABLE CONSTRUCTION

No moving parts! SlidePad® is a single unit comprised of a high density foam pad encapsulated in AquaPebble™ polyolefin pebbles that are hermetically sealed, making SlidePad® not only resilient to impact but chlorine-resistant, UV-resistant, hygienic, fungistatic and slip-resistant despite repeated use. SlidePad® will not disintegrate, deteriorate, crack, fade and will not shift or move after being bonded to the surface.

LOW MAINTENANCE

Airtight construction means that no maintenance is required!

EASY INSTALLATION

Quick and easy installation! No bolts, screws or fasteners. Drilling into your pool's floor to install anchor mounts isn't necessary. SlidePad® adheres to any prepared surface using SlidePad® Adhesive. SlidePad® will not detach and float to the surface and can be installed by your staff or one of our certified technicians.

WATERTIGHT

The clear, chlorine-resistant flexible coating hermetically encapsulates the entire pad, making it water tight.

COLOR AND SIZE CUSTOMIZATION

Polyolefin color chartSlidePad® has an unlimited number of color combinations to match the theme of your water park. Custom color schemes, shapes and pad sizes are also available.

PRICING

With SlidePad® you get a lower price, better warranty and a better product. Prices start at $875 and vary due to size, shape and thickness.

ENVIRONMENTALLY-FRIENDLY

Polyolefin pebbles are environmentally safe and 100% recyclable.

INCLUDED WITH EVERY PURCHASE

3 year warranty icon
  • SlidePad® Adhesive
  • Adhesive applicator
  • 3-Year warranty against cracking, disintegration, fading, foam compression and loss of slip-resistant properties.





How does SlidePad® Compare with other Pads?

  US THEM
Shipping Method Double Wall Corrugated Shipping Carton (FEDEX) Shrink wrapped to Pallet, Lift Gate Delivery Truck Required
Foam One Piece of High Density Compression Deflection Foam 3 Layers of Foam Glued Together
Thickness 1/2" to 6" encapsulated 1" to 4"
Colors Unlimited AquaPebble™ Granule Color Blends White, Light Blue, Dark Blue
Common Failures None, No Moving Parts Vinyl Cracks, Bolts Loosen and Rust, Foam Loses Resilience
Sizes Unlimited 4
Warranty 3 Years 2 Years
Standard Delivery Time Less than 1 week 1 to 4 weeks
Shapes Unlimited Rectangle Only
Slip Resistance AquaPebbles™ Textured Vinyl
Landing Surface AquaPebbles™ Vinyl Pool Liner
Installation Method Roll-on Bonding Adhesive Metal bolts or screws attached to anchors drilled and mounted into pool floor